Choose a sauce packaging machine by starting from the sauce and the pack: know how your sauce flows and how large its pieces are, settle the package format, which sets the machine type, match the filler to the sauce, and prove on a trial with your own sauce that the machine holds your output, fill weight and seals.
How your sauce flows and the size of its largest pieces point to the filler; its acidity, salt, oil and fill temperature govern the materials and the sealing. Have these on paper before you ask for a quote:
Measure your own sauce instead of using a typical figure for its category. Give the supplier a viscosity reading at fill temperature and samples of every recipe, including the thickest batch and the one with the largest pieces.
The package format fixes which family of machine you are buying, so settle it before you compare machines:
Where a pouch could go either way, choose between form-fill-seal and premade pouches by run length and number of sizes. With long runs and only one to four sizes or styles, form-fill-seal is the better buy; with many sizes changed several times a day, a premade machine is.
A piston filler covers the widest range, from thin liquids to thick pastes and sauces with pieces; gravity and overflow fillers suit only thin sauces without particles.
Some vendor pages offer an auger filler for thick or chunky sauce. PMMI, the packaging machinery association, defines auger fillers as a category for dry, free-flowing products such as powders and granules, so treat an auger in a sauce quote as a reason to ask questions.
On sachet, stick and pouch machines the same choice is made at the doser: a piston or pump doses each lane or each bag.
A sauce machine keeps drips and strings out of the seal by cutting the flow off cleanly at the nozzle and finishing the dose before the seal is made.
On the trial, inspect the nozzle tip and the seals after the machine has run your sauce for a while, as well as the first packs.
A sauce needs a hot-fill machine when you make it shelf-stable by heat, which suits sauces with a pH below 4.6 and a water activity above 0.85 that flow and stand heating without losing quality. In the US, acidified foods must be thermally processed or preserved, and the process for your recipe is set by a process authority, not by the machine supplier.
A typical hot-fill-hold process heats the sauce to around 180–200 °F (about 82–93 °C), fills it, inverts the container and holds it for 2–5 minutes. Cold-fill-hold relies on the sauce’s acid and needs no hot-fill machine.
If you do hot-fill, four things change:
The output you can hold is the speed of the slowest machine on the line running your sauce in your pack, so size the purchase from that figure and the packs per shift you need to sell.
On a filling line the filler is normally designed to be that slowest machine, so whatever follows it, whether capper, labeller, coder, checkweigher or cartoner, has to run faster than the filler’s held output on your sauce.
A machine’s maximum speed can be higher than its working capacity, because thick sauce takes longer to dose and the sealing jaws need enough dwell time for the film to seal.
Start from the packs per shift you need, take off planned time for cleaning and changeovers, and ask the supplier for the speed it will guarantee on your sauce and pack, then see it on the trial.
Buy the level of automation your volume and number of products can keep busy:
Sachets and stick packs start at automatic: no one fills them by hand at volume.
Specify fill accuracy against the legal limit for your pack size and the giveaway you can afford, then verify it by weighing samples from every filling head on your own sauce.
In the US and the EU the legal requirement has two parts: the average of a lot must be at least the labelled quantity, and only a small share of packs may fall short by more than a set amount that depends on pack size.
Under NIST Handbook 133, that set amount is the maximum allowable variation (MAV). A pack labelled by weight under 36 g may be short by 10 % of its label, while a pack of about 500 g may be short by 21.7 g, roughly 4 %. Packs labelled by volume use their own table: a sachet of more than 8 mL up to 14 mL may be short by 1.5 mL. The EU calls its allowance the tolerable negative error.
Ask for the spread on your sauce at your fill size rather than a catalogue ± figure.
To verify, weigh a sample from each filling head or lane separately, and convert to volume with your sauce’s density if you label by volume. Check the mean against the label and each pack against the MAV, on a scale whose division is no larger than a sixth of the MAV.
Have the supplier seal your own film or containers on the machine you are buying, with your sauce, at production speed, then test the packs for seal strength and for leaks.
Ask for two tests: seal strength to ASTM F88, which covers film-to-film seals and film sealed to a rigid or semi-rigid container, and a leak test such as a bubble test, since a strong seal can still have a channel through it. Where you hot-fill, ask for the film’s hot tack as well.
On bottles and jars the closure is the seal, so run your own caps on the capper during the trial and check them for leaks.
Every part the sauce touches should be cleanable, resistant to corrosion by your sauce and made of food-safe material, and the product path should come apart for cleaning. In the US, food CGMP rules also require seams on food-contact surfaces to be smoothly bonded so residue cannot build up. Write these into the quote:
Ask for the measured time from the last good pack of one sauce to the first good pack of the next, cleaning included, and ask which steps are done with the machine stopped and which can be done while it is still running the previous sauce.
In wet processing, US CGMP requires food-contact surfaces to be cleaned and sanitized before use when that is needed to prevent allergen cross-contact, so a switch between sauces with different allergens means a full clean.
Purchase price depends on the format and the level of automation, and it is often the smaller part of what the machine costs you: operating and maintenance costs often add up to far more over the machine’s life.
The running costs to set against the price:
Compare machines, a used one against a new one included, on cost per year of expected use. PMMI’s OpX network publishes a free total cost of ownership workbook for recording these costs side by side.
Send the supplier every recipe that will run on the machine, with your own film or containers, and have it run at production speed long enough to show drips, fill drift and seal failures before you sign. Pick the hardest cases: the thickest batch, the sauce with the largest pieces, and the sauce at its real fill temperature if you hot-fill.
Write the acceptance criteria into the contract before the factory acceptance test, and hold the machine to them again at site acceptance on your floor:

Get Your Custom Packaging Solution
Tell us about your product and production needs. Our engineers will recommend the right machine configuration for your application.
We only use your details to reply to this request.